How to apply MicrobeCare™
Quick and easy set-up protocol for MicrobeCare™ 70-2 and its maintenance
Use a detergent product to remove all organic dirt
and bioburden (microorganisms) from soiled
surfaces before applying MicrobeCare™ 70-2. To be
efficacious, it must make direct contact with the
surface to be coated. If application is not complete
and uniform, microbes will grow on untreated areas.
1 Deep Cleaning
MicrobeCare™ 70-2 is ready to use.
Do not dilute the solution.
Apply
MicrobeCare™
70-2
with
a
trigger
sprayer
directly
to
the
surface
to
be
treated.
Spray
from
a
distance of 20 cm. 6 to 8 sprays/m2.
or
Apply MicrobeCare™ 70-2 with an electrostatic
sprayer directly to the surface to be treated. Set the
Electrostatic Spray Gun at 40 Microns and spray at a
distance of 60 to 80 cm from the nozzle to the
surface.
Contact time and drying :
Allow product to dry. Do not touch until the product
is dry.
MicrobeCare™ 70-2 reaches
its efficacity in 60 minutes
2 Application
3 Action Time
4 Microfiber Wipe
It is essential to keep surfaces clean after
the surface treatment. It can always
contact and destroy microbes.
Clean daily using a detergent.
NO NEED TO DISINFECT
FOR 365 DAYS!
5 Daily Protocol
Application with Trigger Spray:
Wipe with a clean microfibre. Do
not rinse.
Application with Electrostatic Spray: There is no need to wipe the surface. Simply let it dry.
Contact Us:
By Phone: +60 3 6413 2742
By Email: contact@microbeclean.asia
TM
1 Deep Cleaning
1 Deep Cleaning
1 Deep Cleaning
Video Demonstration
How to apply MicrobeCare™ 70-2 using trigger spray
How to apply MicrobeCare™ 70-2 using Electrostatic Spray
